MAKITA 18V BRUSHLESS 10 PIECE 3 X 5.0AH COMBO KIT DLX1042TX1

128.99
        SPECIAL OFFER

          Please select all product options

          Product was out of stock

          share
          Description
          1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
          1 x MAKITA 18V 1/4inch Brushless Impact Driver Skin DTD154Z
          1 x MAKITA 18V Brushless 125mm Slide Switch Angle Grinder Skin DGA504Z
          1 x MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z
          1 x MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z
          1 x MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z
          1 x MAKITA 18V Brushless 1/2inch Impact Wrench Friction Ring Skin DTW300Z
          1 x MAKITA 18V Blower Skin DUB185Z
          1 x MAKITA 18V LED Torch Skin DML815
          1 x MAKITA 7.2/18V Jobsite Radio Bluetooth Skin DMR108
          3 x MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L
          1 x MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892
          1 x MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

          MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z

          The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.

          Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

          Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
          3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter.
          LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application
          High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
          2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
          All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
          XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability

          Specifications

          Max. drilling capacities in wood:

          Auger bit: 50mm
          Self-feeding bit: 76mm
          Hole saw: 152mm
          Max. drilling capacities in steel: 13mm
          Max. drilling capacities in masonry: 16mm
          No load speed:

          Hi: 0 - 2,100rpm
          Lo: 0 - 550rpm
          Impact rate:

          Hi: 0 - 31,500ipm
          Lo: 0 - 8,250ipm
          Max. peak torque: 141Nm
          Max. tightening torque:

          Hard: 130Nm
          Soft: 65Nm

          MAKITA 18V 1/4inch Brushless Impact Driver Skin DTD154Z

          The Makita DTD154Z Brushless Impact Driver has a high rotational speed of 3,600rpm, which is optimum for fast tightening of self-drilling screws. Featuring an aluminium hammer case, variable speed control and one-touch bit installation, this is a powerful and compact drill to suit any line of work. It also features electronic 3-stage impact power selection and the new T-Mode especially for tightening self-drilling screws.

          Aluminium hammer case
          One-touch bit installation, no need to pull bit sleeve for bit installation
          Twin LED job light with pre-glow and afterglow functions
          High rotation speed at 3600rpm
          Variable speed controlled by trigger
          Ergonomically designed handle with soft grip provides comfortable grip and more control while minimising hand fatigue and pain
          Electronic 3-stage impact power selection - in order to reduce fault tightening, hard/medium/soft impact power can be selected to the material of workpiece or screw type simply by pushing a button
          T-Mode is a special mode optimum for fast tightening of self drilling screws without damaging the screw and workpiece

          Specifications

          Voltage: 18V
          Capacity:
          Machine screw: M4 - M8
          Standard bolt: M5 - M16
          High strength bolt: M5 - M14
          Coarse thread (length): 22mm - 125mm
          Impacts per minute:
          Speed 1: 0 - 3800ipm
          Speed 2: 0 - 2600ipm
          Speed 3: 0 - 1100ipm
          No load speed:
          Speed 1: 0 - 3600rpm
          Speed 2: 0 - 2100rpm
          Speed 3: 0 - 1100rpm
          Max fastening torque: 175Nm
          Vibration level: 12.5m/s²
          Sound pressure level: 96dB(A)
          Sound power level: 107dB(A)
          Dimensions (L x W x H): 117mm x 79mm x 236mm
          Weight: 1.2kg

          MAKITA 18V Brushless 125mm Slide Switch Angle Grinder Skin DGA504Z

          Kickback detection, anti-restart, and soft start
          Automatic Torque Drive increases torque to power through any cut
          Extreme performance with 8,500rpm no load speed
          XPT technology that protects against dust & moisture
          Electronic current limiter
          Easy to hold grip design with rubber for anti-skid
          World's deepest concrete cutting mobile angle grinder at a depth of 20mm
          Excellent performance - as powerful as AC model
          Gear housing can be rotated to suit most cutting and grinding applications
          Automatic speed control changes the cutting speed according to load condition for an optimum operation
          Anti-restart function prevents accidental startup for safety even if the machine is plugged into a power source with the lock-on switch on

          MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z

          Powerful Brushless DC motor (BLDC)
          Automatic Torque Drive; automatically increases motor torque according to load conditions
          Magnesium base with 45 and 50 degrees bevel cutting capacity
          Compact and lightweight design
          Rear dust exhaust port
          Twin LED job light with pre-glow
          LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
          Tool hanger for hanging on a ladder or rafter
          Large lock off lever easily operated even with a gloved hand
          Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

          Specifications

          Voltage: 18V
          No Load Speed: 5,000rpm
          Bevel Capacity: 50º
          Blade Diameter: 165mm
          Max Cutting Capacities:
          0º: 57mm
          45º: 41mm
          50º: 37mm
          Weight: 3.3kg
          Length: 350mm

          MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z

          3 Mode operation: hammer only, rotation only, rotation & hammer
          Unique rubber joint suppresses vibration to battery
          2.0j of impact energy

          Specifications

          Impact Rate: 0 - 4,700ipm
          Vibration per min: 13.5m/s²

          MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z

          32mm stroke with a cutting capacity of 255mm in wood
          Newly designed vertical crank mechanism reduces vibration
          High performance 3,000spm no-load speed
          Rafter hanging hook for added convenience
          XPT technology that protects against dust & moisture

          Specifications

          Length of Stroke: 32mm
          Max. cutting capacities in pipe: ø 130mm
          Max. cutting capacities in wood: 255mm
          Overall Length: 439mm
          Strokes per minute
          Hi: 0 - 3,000spm
          Lo: 0 - 2,300spm
          Voltage 18V

          MAKITA 18V Brushless 1/2inch Impact Wrench Friction Ring Skin DTW300Z

          Variable speed trigger & Quick Trigger mode which engages immediate full speed
          Forward & Reverse Automatic Stop, with 6 modes for customised applications
          High power in a compact design with 330Nm maximum fastening torque
          4 stages of impact force enables the user to set the appropriate torque for each application
          Extreme Protection Technology (XPT) provides enhanced protection against dust and moisture

          Specifications

          Drive Shank: 12.7mm (1/2”) Square
          Impact Rate

          Max: 0 - 4,000ipm
          High: 0 - 3,400ipm
          Med: 0 - 2,600ipm, Soft: 1,800ipm
          Max. capacities high tensile bolt: M10 - M16
          Max. capacities standard bolt: M10 - M20
          Max. fastening torque

          Max: 330Nm
          Hard: 210Nm
          Medium: 160Nm
          Soft: 100Nm
          No Load Speed

          Max: 0 - 3,200rpm
          High: 0 - 2,600rpm
          Medium: 0 - 1,800rpm
          Soft: 0 - 1,000rpm
          Nut busting torque: 580Nm
          Voltage 18V

          MAKITA 18V Blower Skin DUB185Z

          Increased air volume with 3.2m³/min
          3 stage air volume settings & variable speed trigger for maximum control
          Wind speeds of up to 352km/h for higher blowing efficiency
          Ultra-lightweight at just 2.1kg

          Specifications

          Increased air volume with 3.2m³/min
          3 stage air volume settings & variable speed trigger for maximum control
          Wind speeds of up to 352km/h for higher blowing efficiency
          Ultra-lightweight at just 2.1kg
          Specifications
          Max air volume: 3.2m³/min
          Max. Air Velocity: 352km/h
          No Load Speed: 0 - 18,000rpm
          Overall Length: 517mm
          Skin weight: 1.5kg
          Voltage: 18V

          *Dust bag is not included.

          MAKITA 18V LED Torch Skin DML815

          The Makita 18V LXT L.E.D. Flashlight (DML815) delivers bright illumination, versatility, and convenience. The high-luminance 4 L.E.D. flashlight provides 160 lumens. The fast-charging Makita 18V LXT Lithium-Ion Battery delivers up to 23 hours of continuous illumination on a single charge (when using the 18V LXT® Lithium-Ion 5.0Ah battery, sold separately).

          The 12-position aluminum pivoting head provides added versatility, with a durable design engineered for job site conditions. A metal hang-hook provides added convenience. The flashlight has a slim, compact design at 10-3/4”L and weighs only 1.95 lbs. (with 18V LXT battery, sold separately).

          It’s part of Makita’s expanding 18V LXT system, the world’s largest cordless tool system powered by 18V lithium-ion batteries. Makita 18V LXT Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

          High-luminance 4 L.E.D. flashlight provides 160 lumens
          12 position pivoting flashlight head with positive stops from 60° - 110°
          Metal hang hook is convenient and job site durable
          Multi-faceted reflector controls the direction and spread of the light
          L.E.D. and provides a sharp, round spotlight
          Compact and ergonomic design at only 10-3/4" long
          Weighs only 1.95 lbs. with battery (battery and charger not included)
          Rubberized soft grip provides increased comfort on the job
          An ideal addition to any toolbox or workshop
          Battery and charger sold separately
          Only use genuine Makita batteries and chargers

          Specifications

          Power Type: Cordless
          Battery: 18V LXT Lithium-Ion
          Lumens: 160
          Bulb: 4 LED

          MAKITA 7.2/18V Jobsite Radio Bluetooth Skin DMR108

          Flexible antenna – can be folded and protected underneath the carry handle or removed and stored inside the battery compartment
          Durable design – front metal pipe and elastomer bumpers protect against rough handling with falling impact strength of 1.0m
          AUX-IN jack – can be used as a stereo speaker by connecting an external audio source via 3.5mm AUX cable
          Dust and shower-proof construction – IP64 rated for use in outdoor applications
          2 speaker stereo – 2 x large 89mm speakers provide high-quality sound
          AC adapter jack – the user has the option to power the unit by Makita Li-ion batteries or AC power via the supplied AC adapter
          Bluetooth for streaming audio and foldable antenna for radio
          USB Ports for charging mobile devices
          Compatible with Makita li-ion batteries (7.2V, 10.8V, 12VMAX, 14.4V, and 18V)

          Specifications

          Power source: AC or Makita Li-ion batteries
          Continuous runtime: 6.0Ah - 42hrs
          Frequency band: AM: 522 - 1,710kHz / FM: 87.5 - 108MHz
          Practical max. output: 7.2V:0.5Wx2 / 18V:3.5Wx2
          Speaker: 89mm x2
          Bluetooth: Yes

          MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L

          Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
          Up to 33% more run time per charge compared to BL1830
          Fast 40 minute charging time
          Battery delivers consistent power and run time in extreme temperatures, even in winter (-20&degC)
          Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
          Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
          Battery resists self-discharge and remains ready for use even after long periods of storage
          Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
          Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
          The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
          If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

          MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892

          Fast charging - charges Li-Ion 3.0Ah battery in only22 minutes and Li-Ion Compact series batteries in only 15 mins
          Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
          Forced air cooling fan - cools the battery to minimise charging time
          Digital power display identifies the condition of the battery and charging condition

          MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

          Ideal for transport & storage of your favourite Makita tools
          Weather Resistant
          Durable Nylon Cordura Construction
          Internal Pockets feature straps to retain tools during transit
          External pockets enable storage of accessories and more
          Part No DLX1042TX1
          Barcode 0088381753722
          Combo Kit 10 Piece
          Corded / Cordless Cordless
          Voltage 18V
          Brushless/Brushed Brushless
          Batteries Supplied 3x5.0Ah
          Battery Capacity 5.0Ah
          Battery Type Lithium-Ion
          Brand Makita
          Warranty 5 Year Skin* and 2 Year Battery & Charger